Steel and Stainless Steel Press-Thru™ Spring Plungers with Heavy Pressure
Product Information

Steel and Stainless Steel Press-Thru™ Spring Plungers with Heavy Pressure

The new Northwestern Press Spring Plunger has the same body dimensions, spring pressure and materials as the Press Fit Spring Plungers. It will not have the flange on the nose end. This will allow for insertion into the work piece from the top or bottom, front or back. Simply press the body so the plunger end is flush with the surface. Without the flange, these plungers may be used where less clearance is available. They are made oversized to secure firmly into the hole.

All stainless steel parts are made of 303 material.

Steel bodies and nose are made of 12L14 material with a black oxide finish.

Click here for our special plunger quotation request form.

Patent No. 8,261,424B1


Click Image to Enlarge




Steel and Stainless Steel Press-Thru™ Spring Plungers with Heavy Pressure
Heat Treated Steel Nose - Black Oxide Finish/Stainless Nose
Steel
Part
No.
Stainless
Steel
Part No.
End Pressure
Lbs.
Start
End Pressure
Lbs.
Full
A B C D Net Lbs.
Per 100
10701 10701-SS 1.0 2.0 .125 .284 .062 .070 1
10701A 10701A-SS 1.25 3.25 .157 .365 .078 .093 1
10702 10702-SS 1.5 4.5 .188 .440 .094 .121 1
10703 10703-SS 2.5 6.0 .250 .525 .125 .168 1
10704 10704-SS 4.0 10.0 .312 .688 .151 .186 1
10705 10705-SS 5.0 14.0 .375 .864 .187 .234 2
10706 10706-SS 8.0 18.0 .500 1.218 .250 .332 4
Brown Delrin Nose
10708 10708-SS 1.0 2.0 .125 .284 .062 .070 1
10708A 10708A-SS 1.25 3.25 .157 .365 .078 .093 1
10709 10709-SS 1.5 4.5 .188 .440 .094 .121 1
10710 10710-SS 2.5 6.0 .250 .525 .125 .168 1
10711 10711-SS 4.0 10.0 .312 .688 .151 .186 1
10712 10712-SS 5.0 14.0 .375 .864 .187 .234 2
10713 10713-SS 8.0 18.0 .500 1.218 .250 .332 4