Stainless Steel Standard Lengths with Light Spring Pressures
Product Information

Stainless Steel Standard Lengths with Light Spring Pressures

All stainless steel parts are made of 303 material

The nylon locking element holds the plunger body securely in place without the need for lock nuts or other devices. We recommend a 90 degree countersink 1/32" larger than the major diameter of the mating thread to prevent damaging the element.

To prevent possible spring damage, use of a Northwestern Wrench is recommended when installing from plunger end.

Click here for our special plunger quotation request form.


Click Image to Enlarge




Stainless Steel Standard Lengths with Light Spring Pressures
Stainless Nose
With
Lock Ele.
Part No.
Without
Lock Ele.
Part No.
Color
Code
End
Pressures
Lbs. Start
End
Pressures
Lbs. 1/2
End
Pressures
Lbs. Full
A B C D Net Lbs.
Per 100
33500 33500P Plain 0.5 1.0 1.5 #6-32 17/32 .062 .046 1/2
33503 33503P Plain 0.7 1.5 2.3 #8-32 5/8 .093 .070 1/2
33504 33504P Plain 1.3 2.0 2.7 #10-32 3/4 .125 .093 1/2
33505 33505P Plain 1.0 2.5 4.0 1/4-20 1" .187 .119 1
33506 33506P Plain 1.0 2.5 4.0 1/4-28 1" .187 .119 1
33508 33508P Plain 1.5 3.0 4.5 5/16-18 1" .187 .135 1-1/2
33509 33509P Plain 2.8 5.0 7.2 3/8-16 1-1/8 .187 .186 2
33510 33510P Plain 2.7 6.0 9.3 1/2-13 1-1/4 .250 .248 5
White Delrin Nose
33543 33543P Plain 0.7 1.5 2.3 #8-32 5/8 .093 .070 1/2
33544 33544P Plain 1.3 2.0 2.7 #10-32 3/4 .125 .093 1/2
33545 33545P Plain 1.0 2.5 4.0 1/4-20 1" .187 .119 1
33546 33546P Plain 1.0 2.5 4.0 1/4-28 1" .187 .119 1
33548 33548P Plain 1.5 3.0 4.5 5/16-18 1" .187 .135 1-1/2
33549 33549P Plain 2.8 5.0 7.2 3/8-16 1-1/8 .187 .186 2
33550 33550P Plain 2.7 6.0 9.3 1/2-13 1-1/4 .250 .248 5

All parts conform to TCMAI Standards

Standard lengths available with Phenolic noses upon request.