Stainless Steel Short Lengths with Heavy Spring Pressures
Product Information

Stainless Steel Short Lengths with Heavy Spring Pressures

All stainless steel parts are made of 303 material.

The nylon locking element holds the plunger body securely in place without the need for lock nuts or other devices. We recommend a 90 degree countersink 1/32" larger than the major diameter of the mating thread to prevent damaging the element.

To prevent possible spring damage, use of a Northwestern Wrench is recommended when installing from plunger end.

Click here for our special plunger quotation request form.


Click Image to Enlarge




Stainless Steel Short Lengths with Heavy Spring Pressures
Stainless Nose
With
Lock Ele.
Part No.
Without
Lock Ele.
Part No.
Color
Code
End
Pressures
Lbs. Start
End
Pressures
Lbs. 1/2
End
Pressures
Lbs. Full
A B C D Net Lbs.
Per 100
33420 33420P Yellow 1.5 3.1 4.75 #8-32 7/16 .052 .070 1/2
33421 33421P Yellow 1.5 3.1 4.75 #8-36 7/16 .052 .070 1/2
33422 33422P Yellow 1.75 4.0 6.25 #10-32 15/32 .065 .093 1/2
33423 33423P Yellow 3.0 6.75 10.5 1/4-20 17/32 .078 .119 1/2
33424 33424P Yellow 3.75 9.6 15.5 5/16-18 9/16 .084 .135 1
33425 33425P Yellow 4.5 11.5 18.5 3/8-16 5/8 .110 .186 2
33426 33426P Yellow 5.0 16.5 28.0 1/2-13 3/4 .151 .248 3
Brown Delrin Nose
33460 33460P Plain 1.5 3.1 4.75 #8-32 7/16 .052 .070 1/2
33461 33461P Plain 1.5 3.1 4.75 #8-36 7/16 .052 .070 1/2
33462 33462P Plain 1.75 4.0 6.25 #10-32 15/32 .065 .093 1/2
33463 33463P Plain 3.0 6.75 10.5 1/4-20 17/32 .078 .119 1/2
33464 33464P Plain 3.75 9.6 15.5 5/16-18 9/16 .084 .135 1
33465 33465P Plain 4.5 11.5 18.5 3/8-16 5/8 .110 .186 2
33466 33466P Plain 5.0 16.5 28.0 1/2-13 3/4 .151 .248 3

All parts conform to TCMAI Standards

Standard lengths available with Phenolic noses upon request.