Stainless Steel Short Lengths with Light Spring Pressures
Product Information

Stainless Steel Short Lengths with Light Spring Pressures

All stainless steel parts are made of 303 material.

The nylon locking element holds the plunger body securely in place without the need for lock nuts or other devices. We recommend a 90 degree countersink 1/32" larger than the major diameter of the mating thread to prevent damaging the element.

To prevent possible spring damage, use of a Northwestern Wrench is recommended when installing from plunger end.

Click here for our special plunger quotation request form.


Click Image to Enlarge




Short Lengths (With Light Spring Pressures)
Stainless Nose
With
Lock Ele.
Part No.
Without
Lock Ele.
Part No.
Color
Code
End
Pressures
Lbs. Start
End
Pressures
Lbs. 1/2
End
Pressures
Lbs. Full
A B C D Net Lbs.
Per 100
33520 33520P Plain 0.5 1.0 1.5 #8-32 7/16 .052 .070 1/2
33521 33521P Plain 0.5 1.0 1.5 #8-36 7/16 .052 .070 1/2
33522 33522P Plain 0.75 1.62 2.5 #10-32 15/32 .065 .093 1/2
33523 33523P Plain 1.0 2.25 3.5 1/4-20 17/32 .078 .119 1/2
33524 33524P Plain 1.5 2.75 4.0 5/16-18 9/16 .084 .135 1
33525 33525P Plain 1.5 3.25 5.0 3/8-16 5/8 .110 .186 2
33526 33526P Plain 1.75 3.62 5.5 1/2-13 3/4 .151 .248 3
White Delrin Nose
33560 33560P Plain 0.5 1.0 1.5 #8-32 7/16 .052 .070 1/2
33561 33561P Plain 0.5 1.0 1.5 #8-36 7/16 .052 .070 1/2
33562 33562P Plain 0.75 1.62 2.5 #10-32 15/32 .065 .093 1/2
33563 33563P Plain 1.0 2.25 3.5 1/4-20 17/32 .078 .119 1/2
33564 33564P Plain 1.5 2.75 4.0 5/16-18 9/16 .084 .135 1
33565 33565P Plain 1.5 3.25 5.0 3/8-16 5/8 .110 .186 2
33566 33566P Plain 1.75 3.62 5.5 1/2-13 3/4 .151 .248 3

All parts conform to TCMAI Standards

Standard lengths available with Phenolic noses upon request.