Spotlight:

Knobs and Handles Catalog
Hex Head Design
Product Information

The replaceable pad swivels to allow for self-alignment on uneven surfaces.

Cylindrical body allows for installation in tight areas.

The housing is tapped for backside fastening.

The replaceable pad fits in a hardened (Rc 58/60) 440c stainless ball cup and is held in place with a lock screw.

The pad can be replaced when worn or a different style pad is required.

The housing is made from alloy steel, heat treated to Rc 43/46 with black oxide finish.

The parts below are for the Swivot assembly only and do not include a pad.

Pads must be ordered separately.

Metric sizes are available.



Click Image to Enlarge


Threaded Body Design
Part
No.
Thread B Head
Height
C Thread
Length
D Int.
Hex
E Degree
Swivel
F* Stand
Off 1
F* Stand
Off 2
Ball
Diameter
Replaceable
Pad
Dia. **
Hex Size Load
Rating
lbs
82101 3/8-16 1/2 1/2 1/8 20 1/8 1/4 1/2 3/8 5/8 3,446
82102 3/8-16 1/2 1 1/8 20 1/8 1/4 1/2 3/8 5/8 3,446
82103 3/8-16 1/2 1-1/2 1/8 20 1/8 1/4 1/2 3/8 5/8 3,446
82104 1/2-13 5/8 1 3/16 24 1/8 1/4 5/8 1/2 13/16 5,937
82105 1/2-13 5/8 1-1/2 3/16 24 1/8 1/4 5/8 1/2 13/16 5,937
82106 5/8-11 11/16 1 1/4 22 1/8 1/4 3/4 5/8 15/16 9,932
82107 5/8-11 11/16 2 1/4 22 1/8 1/4 3/4 5/8 15/16 9,932
82108 3/4-10 3/4 1 5/16 20 1/8 1/4 7/8 3/4 1-1/8 14,862
82109 3/4-10 3/4 2-1/2 5/16 20 1/8 1/4 7/8 3/4 1-1/8 14,862
82110 1-8 1 2 3/8 20 1/8 1/4 1-1/8 1 1-1/2 28,158
82111 1-8 1 4 3/8 20 1/8 1/4 1-1/8 1 1-1/2 28,158

* F1 - Stand off with 3/8 height pad; F2 - Stand off with 1/2 height pad.

** Select any fixed gripper or rest pad with the proper diameter and tapped hole.