Steel and Stainless Steel Press-Thru™ Spring Plungers with Light Pressure
Product Information

Steel and Stainless Steel Press-Thru™ Spring Plungers with Light Pressure

The new Northwestern Press Spring Plunger has the same body dimensions, spring pressure and materials as the Press Fit Spring Plungers. It will not have the flange on the nose end. This will allow for insertion into the work piece from the top or bottom, front or back. Simply press the body so the plunger end is flush with the surface. Without the flange, these plungers may be used where less clearance is available. They are made oversized to secure firmly into the hole.

All stainless steel parts are made of 303 material

Steel bodies are made of 12L14 material with a black oxide finish.

Zinc plated nose.

Patent No. 8,261,424B1

Click here for our special plunger quotation request form.


Click Image to Enlarge





Steel and Stainless Steel Press-Thru™ Spring Plungers with Light Pressure
Heat Treated Steel Nose - Zinc Plated Finish/Stainless Nose
Steel
Part
No.
Stainless
Steel
Part No.
End Pressure
Lbs.
Start
End Pressure
Lbs.
Full
A B C D Net Lbs.
Per 100
10715 10715-SS 0.50 1.0 .125 .284 .062 .070 1
10715A 10715A-SS 0.75 2.0 .157 .365 .078 .093 1
10716 10716-SS 0.75 2.5 .188 .440 .094 .121 1
10717 10717-SS 1.5 3.0 .250 .525 .125 .168 1
10718 10718-SS 2.0 5.0 .312 .688 .151 .186 1
10719 10719-SS 2.5 7.0 .375 .864 .187 .234 2
10720 10720-SS 4.0 9.0 .500 1.218 .250 .332 4
White Delrin Nose
10722 10722-SS 0.50 1.0 .125 .284 .062 .070 1
10722A 10722A-SS 0.75 2.0 .157 .365 .078 .093 1
10723 10723-SS 0.75 2.5 .188 .440 .094 .121 1
10724 10724-SS 1.5 3.0 .250 .525 .125 .168 1
10725 10725-SS 2.0 5.0 .312 .688 .151 .186 1
10726 10726-SS 2.5 7.0 .375 .864 .187 .234 2
10727 10727-SS 4.0 9.0 .500 1.218 .250 .332 4